Wood FinishingHow-To
How to Sand Between Coats of Polyurethane (Without Cutting Through)
How to sand between coats of polyurethane — the right grit, how little pressure to use, when you can skip it, and…
Guides
In-depth buying guides and how-to articles on sanders, power tools and workshop technique — written to answer the question, not to sell you the most expensive option.
Wood FinishingComparison
Sanding Sealer vs Primer: Which One Do You Actually Need?
Sanding sealer vs primer explained — what each does, which goes under clear finishes and which under paint, the zinc stearate adhesion…
SandersHow-To
How to Sand Antique Furniture (And When You Really Should Not)
How to treat antique furniture — why patina matters, how to tell whether to clean, revive or refinish, identifying shellac, and how…
Power ToolsHow-To
How to Sand and Polish Concrete: Diamonds, Dust and Real Shine
How to sand and polish concrete — why you need diamond abrasives, controlling the silica dust that makes this job different, the…
Power ToolsHow-To
How to Sand Fiberglass Without the Itch: A Safety-First Guide
How to sand fiberglass safely — the protective gear that actually works, wet sanding to eliminate airborne fibres, avoiding gelcoat breakthrough, and…
Sanding TechniquesHow-To
How to Sand Epoxy Resin (And Get the Gloss Back)
How to sand epoxy resin without gumming or clouding it — why full cure matters, wet sanding through every grit, and how…
SandersHow-To
How to Use a Disc Sander: The Down-Side Rule and Square Cuts
How to use a bench disc sander safely and accurately — the down-side rule, squaring the table, sanding perfect mitres, and why…
Floor SandingHow-To
How to Sand Stairs After Removing Carpet: A Complete Guide
How to sand stairs after pulling up carpet — removing every staple, keeping nosings crisp, containing dust in a stairwell, and finishing…
Sanding TechniquesHow-To
How to Sand a Door: Panels, Edges and the Bit Everyone Skips
How to sand a door properly — taking it off and laying it flat, handling panels and mouldings, fixing a door that…
SandersHow-To
How to Use a Random Orbital Sander (The Right Way)
How to use a random orbital sander properly — why pressure causes the swirl marks you are trying to avoid, how fast…