How to protect yourself during the task
First thing first. The thing which matters the most in this situation is the safety of the person. This is the most important thing we need to take care of first. Perfection starts with the protection of the eyes and the lungs.
The reason is once you sand the glass the small tiny pieces of the class will remain in the air.
With every breath, You will inhale the small particles of the glass. What the particles are inside your greeting tag can cause severe damage.
The second is the protection of the eyes. These similar tiny pieces of glass can be dropped in your eyes. Once inside the eye even a small tiny piece of the glass can damage the eye. The damage can be irreparable. to save yourself from this type of damage. It is important to use the mask for the face. the eyes can be protected with the help of the eyeglasses specially built for this purpose.
The third thing is the protection of the hand. Hend can be injured with the sharp edge of the glass. This is therefore important to protect the hands with the gloves.
So before starting the stand work out the protection on the eyes, mask on the face and hands in the glove. You are all set to start your sending task.
How to choose the appropriate tool
If you do not have the right tool you will not be able to perform the task in the appropriate way.
The best selling tool depends on your task nature and magnitude.
Pose you have to send your small surface. But this service is very large in quantity. This is something which is difficult to do by hand. As you have to repeat the same motion again and again. The recommended tool in this situation is The Dremel sander. This is inexpensive and will certainly speed up the process. You will spend less time and the task will be done without much frustration. even other than sending the demons can perform different other jobs for you. Daikin also worked as a machine polishing tool.
Other than the machine you require three more things
The process to send the glass has three different steps
The three steps to send a glass
Prepare the surface
The first thing is to prepare the surface so that the sanding process can begin. To prepare the surface wet it. Do not put too much water on it. But wet it firmly. Now sand the surface. After some time put some water again for the purpose of the lubrication. This lubrication will certainly reduce the small mirror particles in the form of the dust. These mirror particles in the form of the dust can stay in the air and are dangerous for you.
You can sand in two ways
- Straight line
- 2.Circular path
Depending on the shape of the surface. You can select either one of the two. Once completed this is the time to rinse the glass. If this is something which is not possible then wipe it with a wet cloth.
Application of strengthening sandpapers
This is the time to apply more attention or harder grit scale papers. The milky surface will start to appear on the glass. Keep dropping the water on the surface of the glass. Do not let the glass dry. otherwise, the small glass particles will possibly create a problem.
Check if the glass is smooth. If not then it requires more sanding. Do it till the glass becomes smooth.
Finalize the finish
This is our time to complete the high-quality finish. After this finish, the glass surface should be crystal clear. you can apply serum oxide or the glass polishing compound. UP light on the glass and do it in a circular motion. The electric sander can be used for this purpose. Be patient this will take several minutes to complete the process.
Once completed white surface with the help of a wet cloth. Please make sure that there is no residue left on the surface of the glass.
This process requires more time for polishing. This will bring you better results.
Assorted Sand Papers
We have arranged some of the best available products in the market. This article is about the sandpapers so we have collected some of the best sandpapers available in the market.
Wet & Dry Sandpapers by WaterLuu
15102 glass polish bi diamond hand pad great 200
- These electroplated pads are specially made to use by hand.
- These are designed in the most excellent hand-fitted size.
- The size of the pad is 95 * 55 mm.
- These pads are the quality of A+
- The grit level is 200
- Due to the excellent quality, the pads will enjoy a longer lifespan than its competitors
- This pad is ideal to be used for removing the sharp edges especially the corners.
- This is equally good to smooth the uneven surfaces.
- This pad can be used on wet as well as the dry surface as per the circumstances suggests.
- The pad is available in the single packing
- The pad is fixed on a foam this will help you in the process of sanding.
- It can be used on multiple surfaces like the tiles marble, concrete, granite, and glass..
Finishing Kit The Kinkajou made by Bottle Cuting Inc
- This product is specifically designed to be used with the bottle cutter made byKinkajou.
- The packet contains 30 sheets.
- These carbide sandpaper are of different grades of roughness.
- This is ideal sandpaper to be used at the edges especially working with the glass.
- The weight of this is 8 ounces.
- The dimensions of this sound paper are 5.9 x 5.8 x 0.8. All dimensions are measured in inches
- The color of the product is black.
Abrasive Diamond Sand Paper Sheets by Z-LION
- This product is specifically designed for the areas that are usually hard to reach in normal circumstances.
- These electroplated sandpapers are highly effective for ceramic,glass, porcelain, gemstone, concrete, ceramic terrazzo, and stone.
- Be attentive while polishing with the sheets because these sand sheets are aggressive and sharp.
- A variety of these sandpapers are available and you can choose what suits you the most.
- In comparison with other San papers available in the market, these send papers are more durable and long-lasting.
- You will be completely carefree while polishing the surface because no matter how dull the sandpaper is it will do the job for you.
Although the article is concluded but let me give you a free tip. This will give your old but expensive beer Mugs the New look
Make your bear Mugs New
The expensive bear mugs become worthless with lots of lots of scratches. Especially at the handle of the Mug. In case you want to remove the scratches from the handle of the beer mugs. These scratches can be removed from the beer mugs and the beer mugs can be as good as new.
For sanding the beer mugs you require the sand pad or the sandpaper. Be sure to choose the sandpaper that is harder from the glass.
Wet the handle to make it lubricant then start rubbing the handle with the 60 grit sandpaper This 60 grit. Continuously lubricant the handle with the water. This is batter to do this in the sink. And under the constant flow of the Tab.
As the sanding is finished this is the toe to apply the polisher. The polisher will give it a perfect shine. The beer glasses will be as good as new. In this way, you will save your old but expensive glasses.